Isolation Flange and Bracketed Modules

Isolation flange and bracketed pump modules offer a convenient method of mounting a circulator for chilled water and heating applications. These modules can be used for adding a pump to an existing flow center to increase head capacity, on the load side or between the heat pump and buffer tank of a hydronic system, on a primary/secondary system, or on the ground loop side of a geothermal system where the flush valves are located separately from the pumps. The double, three-, and four- pump modules are configured in a “push-pull” arrangement so the pumps are in series. The photos below are representative of the series and the table shows the extensive offering.

Features:

Isolation valves or companion flanges included (depends on model)
Factory assembled and leak tested (isolation valve models only)
Choice of Grundfos circulators (115V or 208-230V)
Powder-coated galvanized steel mounting brackets
All components easily serviceable
Quiet and reliable operation

** Submittals will open in a new tab

PN	Pump(s)	Connection	Photo
1037	UPS26-99	Iso Valve, 1" FPT	Coming soon
1057	UP26-116	Iso Valve, 1" FPT
1089	UP26-116SF	Iso Valve, 1" FPT	Coming soon
1069	UPS26-99 115V	Iso Valve, 1" FPT	Coming soon
9102-4F	UPS26-99 115V	1" FPT (No Valves)
1038	UPS26-99 (2)	Iso Valve, 1" FPT	Coming soon
1058	UP26-116 (2)	Iso Valve, 1" FPT
1090	UP26-116SF (2)	Iso Valve, 1" FPT	Coming soon
1047	UPS26-99 115V (2)	Iso Valve, 1" FPT	Coming soon
1045	UPS26-99 (3)	Iso Valve, 1" FPT	Coming soon
1061	UP26-116 (3)	Iso Valve, 1" FPT
1091	UP26-116SF (3)	Iso Valve, 1" FPT	Coming soon
1070	UPS26-99 115V (3)	Iso Valve, 1" FPT	Coming soon
1046	UPS26-99 (4)	Iso Valve, 1" FPT	Coming soon
1062	UP26-116 (4)	Iso Valve, 1" FPT
1092	UP26-116SF (4)	Iso Valve, 1" FPT	Coming soon
1071	UPS26-99 115V (4)	Iso Valve, 1" FPT	Coming soon